Collection: 1969–1973 longhood Porsche 911 parts
Parts for 1969–1973 longhood Porsche 911s, from stock-width repairs to RS, ST and RSR builds. Choose a category below, or read the guide for matching hoods, bumpers, flares and tails.
Read the collection guide +
Keeping the narrow early profile
The early long hood uses the original-style hinge and latch arrangement. The stock-width S-style front bumper is for the narrow longhood front-fender profile, not wider RSR front panels.
RS and ST-style rear bodywork
Compare the 9-inch-profile RS rear bumper and the dual-exhaust version. These are intended for the stated RS-width rear quarters. On an original narrow 1969–1973 body, the bumper ends need adjustment rather than simply lining up unchanged.
The RS-style ducktail is a separate lid choice. Its SC/Carrera-style plastic grille is not included.
A wider RSR-style panel set
The driver-side RSR/ST fender with filler bucket and passenger fender pair with the wider early RSR front bumper. At the rear, the 11-inch-profile RSR bumper needs its matching rear-quarter interface.
Those width labels describe body profiles, not a promise that a particular wheel and tire will clear. Check offsets, suspension and the actual arches during the mock-up.
Individual panels or the early-car kit?
The early-car RSR-style kit packages a coordinated panel selection. Compare its included parts before buying anything separately. If your donor is a later G-body or 964, use the longhood backdate guide instead; its latch and conversion requirements are different.
Not sure which setup you have? Ask us in chat before choosing your parts.
Start with your 911
Choose your car, then check the fitment notes on each part.
Shop by build
Parts by model year
Some parts are replacements; others need conversion work. Check the notes for your car’s bodywork, engine and existing parts.
-
911 RS/ST Rear Flares 9"
Conversion / bodywork
RS/ST 9-inch rear-flare pair for bodywork using the listed RS-width rear bumpers.
Bodywork conversion: match the rear bumper profile and plan the panel grafting.
Regular price $ 351.50 USDRegular priceUnit price / perSale price $ 351.50 USD -
911 Stock Fenders '65-'73
Check your setup
Stock-width early fender family. Confirm which side and fuel-filler version this listing supplies before ordering.
Early long-hood bodywork. Check the supplied side/version and matching fender width.
Regular price $ 1,149.00 USDRegular priceUnit price / per$ 1,175.00 USDSale price $ 1,149.00 USDSale -
911RS Type Quarter Panels 9" pair
Conversion / bodywork
Complete RS-style 9-inch rear-quarter pair, from engine-lid area to door, for the listed RS-width bumpers.
Bodywork conversion: match the rear bumper profile and plan the panel grafting.
Regular price $ 836.00 USDRegular priceUnit price / perSale price $ 836.00 USD -
Porsche 911 RS Front-Bumper Grille
Check your setup
Front oil-cooler grille for GT Racing parts 3 and 4 early-style bumpers; it is not an engine-lid grille.
For the GT3/GT4 early-style front bumpers, not an engine-lid grille.
Regular price $ 80.75 USDRegular priceUnit price / perSale price $ 80.75 USD -
Sold outPorsche Hood/Deck Lid Pins
Check your setup
A pair of hood/deck-lid pins. Mounting position and panel reinforcement must suit the car and panel.
Shared fabrication component. Match the dimensions, mounting points and supporting parts.
Regular price $ 57.00 USDRegular priceUnit price / perSale price $ 57.00 USDSold out -
911 H1-H4 Head Light Replacement
Check your setup
Clear formed replacement pieces for H1/H4-style lights on a race build, not complete working headlights.
For a matching classic headlight/fender arrangement; check the lamp shape and mounting.
Regular price $ 228.00 USDRegular priceUnit price / perSale price $ 228.00 USD -
901 Head Light Replacement
Check your setup
Clear formed race replacements for the early 901-style light shape, not complete working headlights.
For an early 901-style headlight arrangement on a race build.
Regular price $ 228.00 USDRegular priceUnit price / perSale price $ 228.00 USD -
911 Splitter
Check your setup
Oversized flat splitter blank requiring trimming to suit the bumper; it is not a vehicle-specific ready-fit panel.
Shared fabrication component. Match the dimensions, mounting points and supporting parts.
Regular price $ 313.50 USDRegular priceUnit price / perSale price $ 313.50 USD -
911 H1-H4 Head Light Covers
Check your setup
Covers described for H1/H4-style headlights. Exact profile, mounting and clearance are not yet verified.
For a matching classic headlight/fender arrangement; check the lamp shape and mounting.
Regular price $ 167.79 USDRegular priceUnit price / perSale price $ 167.79 USD -
Tow Hook For All Cars
Check your setup
Adjustable universal-style tow hook requiring a structural mounting point suitable for towing loads.
Shared fabrication component. Match the dimensions, mounting points and supporting parts.
Regular price $ 66.50 USDRegular priceUnit price / perSale price $ 66.50 USD -
911 Hood Skin "Race" '65-'73
Application notes
Long-hood race skin, designed for hood-pin mounting rather than the framed stock-latch assembly.
Regular price $ 712.50 USDRegular priceUnit price / perSale price $ 712.50 USD -
911 RS Type Hood Draw latches
Check your setup
Rubber-and-stainless draw-latch pair for an early RS-style hood installation; mounting must be planned with the panel.
For a custom early-style panel installation; plan the mounting position and panel travel.
Regular price $ 47.50 USDRegular priceUnit price / perSale price $ 47.50 USD -
Sale
911 Headlight Bucket
Check your setup
A pair of stock-style fiberglass headlight buckets. Match the fender and lamp arrangement before fitting.
For a matching classic headlight/fender arrangement; check the lamp shape and mounting.
Regular price $ 249.79 USDRegular priceUnit price / per$ 250.00 USDSale price $ 249.79 USDSale -
911 Mirror Aluminum Base and Glass
Check your setup
Mirror base-and-glass pair for the supplier's 18EVO doors and part 49 mirror arrangement, not a universal factory-mirror replacement.
For the matching GT18EVO doors / GT49 mirror arrangement, not a stock-mirror replacement.
Regular price $ 209.00 USDRegular priceUnit price / perSale price $ 209.00 USD -
Porsche Car Tie Downs
Check your setup
Tie-down anchor pair intended for rear shock mounting bolts; confirm the actual attachment arrangement before use.
Check the rear-shock-bolt attachment and suitability for tie-down loads before choosing.
Regular price $ 66.50 USDRegular priceUnit price / perSale price $ 66.50 USD -
911 Tow Hook
Application notes
Engine-mounted tow hook documented for 1965–1998 911s, using existing engine bolts.
Regular price $ 76.00 USDRegular priceUnit price / perSale price $ 76.00 USD









